State Motors & Control Solutions

CALL TOLL FREE TO ORDER NOW
1.866.354.0063

Call Today

Product Finder

PART #
Need Help?
1.866.354.0063
Accept Credit Cards
MasterCard Visa American Express
Trusted Products
View All Manufacturers

WEG Electric

Automation

WEG Variable Frequency Drives

WEG Variable Frequency Drive CFW-08: 0.25hp - 20hp

WEG Variable Frequency Drive CFW-08: 0.25hp - 20hp

Description

The WEG CFW-08 VSD series is intended for speed control of three-phase induction motors. These VSDs incorporate the most advanced technology and full features in a compact product, beyond a set of special functions available.

WEG CFW-08 VSDs are easy to install and operate. They are equipped with a optimized software that can be easily set through a Keypad, which enables them to process and control most of industrial machines.

In addition, the CFW-08 Plus series is equipped with dead time compensation technique, thus avoiding motor instability and providing increase of torque at low speeds.

Applications

Centrifugal Pumps, Process Pumps, Fans / Exhausters, Stirrers / Mixers, Extruding Machines, Conveyors, Roller Tables, Granulators, Pelletizing Machines, Driers, Rotating Ovens, Rotating Filters, Winders, Unwinding Machines, Cutting and Welding Machines.

Features

  • Power Range: from 0,25 to 20 HP.
  • Power Supply Voltage: 200-240 V, 380-480 V, 500-600 V.
  • DSP (Digital Signal Processor) control provides a reasonable improvement of inverter performance
  • State-of-the-Art Technology with the newest generation of IGBTs
  • Electronics with SMD components
  • Scalor (V / F) or sensorless components
  • Sinusoidal PWM modulation - Space Vector Modulation
  • Latest generation IBGT modules
  • Considerable motor noise reduction
  • Interface with membrane keypad (standard and remote HMI)
  • Flexible programming
  • Compact dimensions
  • Easy installation and operation
  • High starting torque
  • Conduit installation kit
  • Optional internal (class A) and external (class B) EMC filters 

WEG Variable Frequency Drive CFW-08 Washdown NEMA4X: 2hp - 20hp

WEG Variable Frequency Drive CFW-08 Washdown NEMA4X: 2hp - 20hp

Description

Coming from the original CFW-08, the the WEG NEMA 4X AC Drive features a IP66 rated enclosure that protects against high pressure water, corrosion and dust. The Drive is designed to be mounted directly in severe environments and can be used in washdown applications without need for a custom enclosure.

For higher protection, the heat sink is totally painted, that means that the aluminum will not changed the appearance with the use, resulting in less maintenance.

The electronic boards are tropicalized (conformal coated) and as this product may be installed in humid and dusty environments.

Applications

  • Food industry
  • Beverage industry
  • Chemical industry
  • Petrochemical
  • Others applications requiring full protection of the electronic equipment

Features

  • Power Range: from 2 to 20 HP
  • Power Supply Voltage: 200-240 V, 380-480 V, 500-600 V
  • Protection degree IP56 - NEMA4X
  • DSP (Digital Signal Processor) control provides a reasonable improvement of inverter performance
  • State-of-the-Art Technology with the newest generation of IGBTs
  • Electronics with SMD components Scalor (V / F) or vector sensorless
  • Sinusoidal PWM modulation - Space Vector Modulation
  • Latest generation IBGT modules
  • Considerable motor noise reduction
  • Flexible programming
  • Easy installation and operation
  • High starting torque CANopen, DeviceNet and Profibus Communication as optional
  • Internal (class A) and external (class B) EMC filters

WEG Variable Frequency Drive CFW-09: 1hp - 500hp

WEG Variable Frequency Drive CFW-09: 1hp - 500hp

Description

The WEG CFW-09 Series of Variable Speed Drives incorporate the world’s most advanced technology in drives for three-phase AC induction motors.

The Vectrue Technology™ represents a siginificant advancement, allowing this new generation of WEG inverters to combine V / F, Sensorless Vector and Closed Loop Vector (with encoder) control techniques, all in one product.

An innovation was also introduced to simplify applications that require braking torque. A new feature named Optimal Braking™ eliminates the need for the dynamic braking resistor in some applications allowing a simpler, more compact and economic solution.

Applications

Fans / Exhausters, Centrifugal Pumps, Metering / Processing Pumps, Mixers, Compressors, Extruders, Pumps, Screeners, Vibratory Feeders, Crushers, Dynamic Separators, Conveyors, Cement Ovens, Roller Tables, Winders / Unwinders, Overhead Cranes / Cranes, Presses / Lathes / Milling Cutters, Drillers / Grinders, Laminators, Cutting Lines, Ingot Molding Lines, Pipe Forming Machines, Wire Drawing Machines, Veneer Lathes, Chippers, Plains, Saws, Air Conditioners Units, Rotating Filters, Paper Machines, Paper Rewinders, Calenders, Waste Dosers, Ball Mills, Enameling Machine, Botllers, Injection Machines, Granulators, Booster Systems, Looms, Spinning Machines, Carding Machines, Warpers, Palletizers, Monorails, Commercial Elevators, Overhead Cranes and Hoists.

Features

  • Power Range: from 1.5 to 500 HP.
  • Power Supply Voltage: 220-230 V, 380-480 V, 500-600/690 V.
  • Vectrue Technology®: This technology was developped by WEG and provides the following advantages:
    • V / F or Vector Control modes
    • True Flux Vector Control in either open or close loop vector
    • True Open Loop Vector Control with high torque and fast dynamic response
    • Self-tuning for automatic drive set-up to match the drive to motor and load in vector modes.
  • Optimal Braking®: WEG technology for applications requiring short stopping times and/or stops under high inertial loading. The great advantage of eliminating the need for a braking resistor.
  • High perfomance RISC 32 bit microprocessor
  • Vector and Scalor Control with selection by parameter
  • Detachable SMART keypad with dual display (LCD and LED)
  •  Variable and Constant Torque ratings
  • Degree of Protection NEMA 1 / IP 20
  • Compact design
  • Simplified installation and programming
  • Oriented start-up
  • Through surface mounting option
  • On / Off-line PC programming with SuperDrives software
  • DCbus connections available
  • Fieldbus network communication. Profibus DP or DeviceNet (opcional). Modbus RTU (built-in)
  • COPY Function: Allows copying parameters from one drive to others
  • Multi-Speed Funcion: Up to eight different speeds can be programmed
  • Overlapping PID Regulator: For applications where a process variable has to be controlled by the motor speed

WEG Variable Frequency Drive Shark Drive™ CFW 09 NEMA 4X IP56: 1hp to 10hp

WEG Variable Frequency Drive Shark Drive™ CFW 09 NEMA 4X IP56: 1hp to 10hp

Description

The WEG SHARK VARIABLE FREQUENCY DRIVE is designed to complement the enclosure ruggedness of WEG's SHARK MOTOR Product Line. The All Stainless Steel NEMA 4X Enclosure is ideal for high pressure hose wash down and corrosive environments that are typically found in the food processing and pharmaceutical industries.
The Shark Drive's complete package combination of the CFW-09's triple control capability (Volts/Hertz, Sensorless or Closed Loop Vector) matched with the Shark Drive's NEMA4X enclosure rating allows the Shark Drive™ to succeed in virtually all applications in any industrial environment.

Applications

  • Pumps
  • Fans / Blowers
  • Conveyors
  • Rollout tables
  • Agitators
  • Mixers

Standard Features

  • NEMA 4X All Stainless Steel Enclosure
  • V/Hz and Sensorless Vector Control
  • Self Tuning
  • Single and Three-phase input voltage
  • 200-240V or 380-480V input voltage
  • 150% current overload capacity
  • Dynamic Braking transistor
  • 32 bit RISC microprocessor controlled PWM output
  • 1.25 / 2.5 / 5 / 10 kHz adjustable switching frequency
  • Six isolated programmable digital inputs
  • Three programmable relay outputs (250Vac / 1A)
  • Two isolated programmable analog inputs
  • Two programmable analog outputs
  • Protective features: Over current, motor overload, drive over temperature, output phase-to-phase and phase-to-ground short circuit, DC bus over and under voltage, power supply under voltage and phase loss and external fault
  • Control features: Linear and "S" ramp acceleration and deceleration, local/remote control, DC braking, torque boost, motor slip compensation, electronic pot, preset speeds, adjustable V/Hz profile, maximum and minimum adjustable frequency limits, two skip frequencies, adjustable output current limit, JOG, ride-thru and flying start and PID regulator
  • Display readings: Motor speed, frequency, voltage, current and torque, output power (kW), four last faults, drive status, digital and analog I/O status,hours powered and hours running
  • Ambient: 104ºF (40ºC), 3300 ft (1000m) altitude, 90% humidity, non-condensing

Optimal Features

  • Close loop vector control
  • RS-485 Serial Interface
  • Fieldbus Comm: Profibus DP, DeviceNet or Modbus RTU
  • Encoder buffered output
  • Additional digital and analog I/O

WEG Variable Frequency Drive CFW-11: 1.5hp - 600hp

WEG Variable Frequency Drive CFW-11: 1.5hp - 600hp

Launching

WEG is lauching a new generation of inverters with state-of-the-art technology for three-phase induction motor control. Aimed at increasing the productivity for its customers.

  • 1.5 up to 75 hp  200-240 V – Single phase (up to  3 hp) or Three phase
  • 2 up to 600 hp 380-480 V – Three phase

Plug and Play

The filosofy Plug and Play (conect  and use) enables quick and easy installation of acessories and options 

WEG Variable Frequency Drive CFW-11M: 500hp - 2500hp

WEG Variable Frequency Drive CFW-11M: 500hp - 2500hp

Description

The modularity concept intitled by inserting power units "books" , according to the application demands, makes the CFW-11M suitable for all range of power meeting Normal Duty and Heavy Duty requirements and it increases the VSD reliability as well.

Features

  • V / F (scalar), Sensor less Vector Control and Closed Loop Vector Control
  • Senusoidal PWM modulation - Space Vector Modulation
  • EMC filters (Optional)
  • Communication networks: CANopen, ProfiBus DP, DeviceNet, Devicenet Profile, Modbus RTU,
  • PID Regulator
  • DSP Control
  • Serial and Remote HMI (optional)
  • 0.5% Load Reactor built-in
  • Normal and Heavy Duty Applications 
  • Up to 5 units can be paralled
  • Fiber Optics for PWM Signals

Applications

Fans / Exhausters, Centrifugal Pumps, Metering / Processing Pumps, Mixers, Compressors, Extruders, Pumps, Screeners, Vibratory Feeders, Crushers, Dynamic Separators, Conveyors, Cement Ovens, Roller Tables, Winders / Unwinders, Overhead Cranes / Cranes, Presses / Lathes / Milling Cutters, Drillers / Grinders, Laminators, Cutting Lines, Ingot Molding Lines, Pipe Forming Machines, Wire Drawing Machines, Veneer Lathes, Chippers, Plains, Saws, Air Conditioners Units, Rotating Filters, Paper Machines, Paper Rewinders, Calenders, Waste Dosers, Ball Mills, Enameling Machine, Botllers, Injection Machines, Granulators, Booster Systems, Looms, Spinning Machines, Carding Machines, Warpers, Palletizers, Monorails, Commercial Elevators, Overhead Cranes and Hoists.

WEG Controls

WEG Contactors (9 to 105A) and Overload Relays

WEG Contactors (9 to 105A) and Overload Relays

Contactors Description

The WEG CWM general-purpose contactor line has been designed taking into consideration industrial duty and reliability in mind. All contactors are manufactured to assure the highest quality manufacturing processes and component materials. This way, WEG offers reliable solutions for low-voltage applications in electric panel assemblers, OEMs, distributors and end users.

Given their compact footprints, WEG CWM contactors allow total panel space optimization, with only a few compact frame sizes from 5 to 75Hp@460V. Reducing inventory is a “snap” with CWM’s common accessories. For example, front & side mounted auxiliary contact blocks are the same from 5 to 75Hp@460V.

Contactors Main Features

- General purpose applications;
- 2 and 3 pole versions available;
- Direct mounting to RW overload relay with no accessory;
- Direct mounting to MPW manual motor protectors with use of ECCMP accessory;
- Mirror Contacts for Safety-Related Applications;
- Wide coil voltage selection AC or DC;
- Built-in auxiliary contacts up to 10HP @ 460V;
- Common front & side mountable auxiliary contact blocks for entire series

Contactors (112 to 800A) and Overload Relays

Contactors (112 to 800A) and Overload Relays

Contactors Description

The WEG CWM general-purpose contactor line has been designed taking into consideration industrial duty and reliability in mind. Rated for inductive loads up to 800A or 600Hp@460V, WEG can offer the suitable contactor for your application.

Designed for extended mechanical and electrical life, dependable switching in even the most heavy-duty applications can be achieved. All WEG contactors are manufactured to assure the highest quality manufacturing processes and component materials. This way, WEG offers reliable solutions for low-voltage applications in electric panel assemblers, OEMs, distributors and end users.

Contactors Main Features

- General purpose applications;
- Mirror Contacts for Safety-Related Applications;
- Electronic coil for AC/DC applications is offered as standard, enhancing performance and durability;
- Built-in surge suppressor also supplied as standard;
- Spare parts for field installation

WEG Manual Motor Protector

WEG Manual Motor Protector

Description

WEG MPW Manual Motor Protectors series are the state-of-the-art products available for worldwide market. With the latest technology and design, you’ll find how easy is to save panel space and to face almost any application in motor control. Built in a very compact frame size, this series combine motor control, disconnect means, short-circuit and motor overload protections in just one component. Units range from fractional up to 75Hp@460Vac and a complete range of accessories is available to complete the protection.

Manual Motor protectors include some of the same features you can find in WEG’s RW bimetal overload relays, such as Class 10 protection, ambient temperature compensation and phase failure sensitivity, which give you all the protection your motors need. For short circuit protection, the magnetic device trips at 13 times the maximum FLA of the component.

Motor protectors are designed for use according to international standards, making them suitable for applications all over the world.

Main Features

- High short-circuit interruptinratin– up to 50kA @ 480V;
- Current limitinshort-circuit protection;
- Thermal overload protection Class 10;
- Phase loss sensitivity protection;
- Ambient temperature compensation -4ºF +140ºF (-20ºC +60ºC);
- Lockable rotary handle mechanism for disconnect;
- Visual indication of ON-TRIP-OFF status;
- 35mm DIN-rail mounting;
- Snap-in accessories;
- Finger safe protected terminals;
- Rated for DC applications;
- Test trip feature;
- Coordination type 2 per IEC60947-4-1 and UL508E, with WEG’s CWM contactors;
- Manual Motor Starters;
- Group motor installations (per NEC Article 430);
- Multi-motor starter applications;
- Suitable for motor disconnect applications;
- UL Type-E self protected combination starter

WEG Molded Case Circuit Breakers

WEG Molded Case Circuit Breakers

Description

The WEG ACW Series of Molded Case Circuit Breakers are now available with UL489 certification.  Available in four different compact frames, the New WEG ACW Series will assure top performance for power distribution on both thermal and short-circuit protection from 15 to 800Amps.

Its robust desing and double contacts structure optmize performance and increase breaking capacity (kA rms). The ACW series is available in two levels of short-circuit interrupting capacity – standard industrial & commercial applications (35kA), as well as required in high-performance applications (65kA). Common plug-in accessories simplify field installation and minimize inventory variations on distributors’ shelves.

Main Features

- World class breaker with UL489 and CE approvals;
- Standard & High breaking capacity versions (35 and 65kA@460Vac);
- Different trip units available to better match application requirements;
- Wide range of field installed internal & external accessories;
- Characteristics curves for superior protection (coordination and selectivity

WEG Pushbuttons and Pilot Lights CSW

WEG Pushbuttons and Pilot Lights CSW

Description

WEG has used its leading-edge technology & development capability to design the CSW series of pushbuttons, pilot lights, selector switches and accessories. These user friendly and durable pilot devices are used in many industrial applications and environments.

It doesn't matter if your application uses Ø22mm or Ø30mm operators, WEG provides both series at an affordable price and superior quality. Designed to offer the ruggedness required for severe industrial applications, both series are NEMA 4, 4X rated (totally insulated) and include a complete line of accessories.

Our hazardous duty series CSW30H also offers a wide selection of operators and pilot devices for hazardous duty applications (Class 1, Division 2 and Zone 2). This series offers a wide selection of hermetically sealed reed and factory sealed contact blocks for superior corrosion resistance.

Quick and Easy Assembly System
The ergonomic design of the new mounting ring allows manual tightening of the device, not requiring the use of additional tools. A lighter and safer tightening method to assemble WEG's Pushbuttons and Pilot Lights.

The entire series can be quickly mounted (just one "click") and may be disassembled using a flat screwdriver.

The contact blocks are individually assembled (stackable for the Ø30mm series) and do not require the use of tools for installation.

Contact Blocks

High efficiency self-cleaning contact blocks; Pure Silver Contacts (Ag100), ensures maximum reliability in every condition even at low energy levels (5mA/12V). NC Contacts with “Positive Break” system, ensures circuit interruption.

NC contacts with "Positive Break" system, which guarantees the interruption of the circuit when activated.

Accessories

Wide range of accessories including plate holders, emergency plate, protective covers for pushbuttons, fxing and extracting tools for lamps and mounting rings, spare lenses and covers

WEG Soft Starters

WEG Combination Soft Starter GPH: 5 - 500hp

WEG Combination Soft Starter GPH: 5 - 500hp

Description

The GPH Series of WEG Combination Soft Starters is an industrial general purpose AC motor Soft Starter package designed for simple and quick installation and start-up, requiring only input power and output motor connections.

The NEMA 4/12 enclosure is ideal for dusty or wet environments. The GPH starters are built to complement the ruggedness and reliability of WEG motors, providing a complete and cost effective AC motor starting and protection solution.

Applications

Pumps, Fans, Blowers, Compressors, Conveyors, Mixers, Crushers, Saws.

Features

  • Rated 500% for 60 seconds
  • 5 - 250HP at 230V and 10 -500HP at 460V
  • NEMA 4/12 wall mount enclosure suitable for dusty, wet, or outdoor applications
  • Circuit breaker with door mounted operator provides built-in short circuit protection and input power disconnect
  • Automatic run rated bypass contactor
  • Fused Control Power Transformer (CPT)
  • Start and Stop Pushbuttons and Run and Fault Pilot Lights on the front cover
  • Terminals for 2 or 3 wire remote Start / Stop
  • Keypad with protective cover mounted on enclosure door, all parameter changes are through the cover-mounted keypad. Dust and water stay out of the enclosure
  • Monitoring of current, voltage, kVA and kW can be done from the outside
  • AC3 rated bypass contactor and motor overload relay is standard on 5 - 30HP / 230V and 10 - 75HP / 460V
  • Keypad mounted inside enclosure
  • No circuit breaker
  • Legs for free standing enclosure
  • AC3 full HP rated bypass contactor with motor overload relay 
  • 575V units are available

WEG Soft-Starter SSW-03: 50hp - 1750hp

WEG Soft-Starter SSW-03: 50hp - 1750hp

Description

WEG Soft-Starters are electronic starters designed to accelerate, decelerate and protect three-phase induction motors. The control of voltage applied to the motor, by means of thyristors firing angle variation, allows smooth starting and stopping.

With proper adjustments it is possible to optimize the motor starting torque so that starting current remains as low as possible.

WEG Soft-Starters are microprocessor based with state-of-the-art design for best starting performance of induction motors and a low cost complete solution.

The Operator Interface allows easy parameter setting for fast and trouble-free start-up.

A Pump Control feature prevents pumps running at no load and eliminates pipeline water hammer.

Applications

Centrifugal Pumps, Alternative Pumps (Sanitation / Irrigation / Petroleum), Fans, Exhausts, Blowers, Air Compressors, Refrigeration (Screw / Piston), Mixers, Aerators, Centrifugal Machines, Crushers, Grinders, Wood Chippers, Paper Refiners, Rotating Ovens, Saws and Shavers (Wood), Mills (Balls / Hammer), Load Transportation.

Features

  • Currents: 120 to 950 A
  • Voltage: 220 to 575 V
  • Built-in Human-Machine Interface (HMI)
  • Kick-Start function for starts with high static friction
  • Pump Control function for the intelligent control of pumping systems
  • Built-in RS-232 serial communication
  • Integral electronic motor protection
  • Operation in environments up to 55°C

WEG Soft-Starter SSW-05: 0.75hp - 75hp

WEG Soft-Starter SSW-05: 0.75hp - 75hp

Description

WEG Soft-Starters are electronic starters designed to accelerate, deccelerate and protect three-phase induction motors, controlling the voltage applied on the motor.

The SSW-05 Plus Micro Soft-Starters, with DSP control (Digital Signal Processor) have been designed to supply an excellent performance during starting and stopping electric motors with excellent cost / benefit ratio.

The Operator Interface allows easy parameter setting, simply fying the start-up and operation activities.

The SSW-05 Plus Micro Soft-Starters are compact, optimizating the space in electrical panels and already incorporates all protections for the driven motor.

Applications

Bladed Vaccum Pumps, Centrifugal Pumps, Crusher (Unloaded Starts), Screw Compressors (Relief Start), Mixers, Cellulose Refiners, Axial Fans (Low Inercia and Low Load).

Features

  • Current: 3 to 85 A
  • Voltage: 220 to 575 V
  • Built-in By-pass
  • DSP control
  • Remote HMI (optional)
  • Built-in motor protections
  • Reduction of stress on couplings and other transmission devices during starting (gear boxes, sheaves)
  • Extended lifetime of motor and mechanical components / parts due to reduced mechanical shocks
  • Easy operation, programming and maintenance
  • Simple electrical wiring
  • Operation in ambient up to 55°C (122°F)

WEG Soft-Starter SSW-07: 6hp - 400hp

WEG Soft-Starter SSW-07: 6hp - 400hp

Description

WEG Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors.The control of the voltage applied to the motor by means of adjustments to the firing angle of thyristors allows the soft-starter to start and stop an electric motor smoothly.

The SSW-07, with DSP (Digital Signal Processor) control was designed for high performance on motor starts and stops with an excellent cost-benefit ratio. Easy to set up, it simplifies start-up activities and daily operation.

The SSW-07 is compact optimizing space in electric panels. It already incorporates electric motor protection. It adapts to customer needs through its easy-to-install optional accessories.

The SSW-07 adapts to customer needs through its easy-to-install optional accessories. Thus, a keypad, a communication interface or a motor PTC input can be added to the product.

Applications

Fans / Exhaust fans, Centrifugal Pumps, Dosing / Process Pumps, Stirrers / Mixers, Compressors, Soap Extruders, Driers / Continuous Ovens, Pelletizers, Conveyors / Monorails, Balls / Hammer Mills, Roller Tables, Polishing Machines, Cutters, Wood Chippers, Saws and Plains, Injectors / Blowers, Granulators, Bottling Lines, Driers / Washing Machines, Bottle Manufacturing Machine, Suppression Systems, Drills / Grinders, Wire Drawing, Dosing Pumps, Process Pumps, Rotating Filters, Rotating Ovens, Wood Chip, Coaters, Paper Refineries, Sifters (Sievers) / Vibrating Tables, Dynamic Separators, Dosers, Air Conditioning Systems, Screw / Piston Compressors, Monorails, Escalators, Laggage Conveyors (Airports).

Features

  • Reduction of mechanical stresses over the coupling and transmission devices (gearboxes, pulleys, gears, conveyors) during the start
  • Increases motor and machine mechanical equipment lifetime due to the reduction of mechanical stress
  • Easy operation, setup and maintenance
  • Simple electrical installation
  • Operates in environments up to 55°C (without current reduction for all models)
  • Integral, electronic motor protection
  • Kick-Start function for starting high breakaway torque loads
  • Reduces Water Hammer in pump applications
  • Limitation of voltage drop during start
  • Universal voltage (220 to 575 Vac)
  • Switched mode power supply with EMC filter for the control electronics (110 to 240 Vac)
  • Built-in by-pass providing size reduction and energy saving
  • Voltage monitoring of the electronics allows to back-up I x t values (thermal image)

WEG TPH Soft-Starter: 100 - 600hp

WEG TPH Soft-Starter: 100 - 600hp

Description

The WEG TPH Soft Starters are designed to conquer the most demanding AC motor starting applications.

While surpassing the highest starting torque requirements, the protective NEMA 4/12 enclosure makes the TPH Soft Starters ideal for the harsh industrial environments, even in wash down locations.

Including as standard an AC3 full HP rated bypass contactor and motor overload relay,emergency direct-on-line starting is available at the flip of a switch while still providing full motor protection. Power lugs make motor connections safe and easy.

The WEG TPH starters are built to complement the ruggedness and reliability of WEG motors, providing a complete and cost effective AC motor starting and protection solution.

Applications

Jaw Crushers, Roller Crushers, Vertical Shaft Impact Crushers, Gyrathory Crushers, Cage Mills, Cone Crushers, Horizontal Shaft Impact Crushers, Hammermills, Grizzly Feeders, Belt Feeders, Belt Conveyors.

Features

  • Rated 500% for 60 seconds for Crusher Duty® applications
  • NEMA 4/12 WEG Blue enclosure. Suitable for dusty, wet or outdoor applications
  • Narrow design requires less space. Legs eliminate difficult wall mounting
  • Protective barriers over 460V and 120V terminals
  • Circuit breaker with door mounted operator provides built-in short circuit protection and power disconnect
  • Full HP rated bypass contactor (AC3) with thermal overload relay and emergency start switch inside the enclosure (Softstart-Off-Acrss the Line) can be used in the event of SSW failure
  • Full SSW protection during both start and bypass provides full protection from over/under current, supply and motor phase fault, phase unbalance, overtemp and over current
  • Keypad and full sized operator controls on cover with steel frame NEMA-4 window and cover over keypad. All parameter changes are through the cover-mounted keypad. Dust and water stay out of the enclosure. Monitoring of current, voltage, kVa and kW can be done from the outside
  • Terminations for remote start-stop furnished - no need to trace control circuit for additional power lines
  • 250VA 120V service receptacle - Power up meters, lights, and small tools without additional power lines
  • Modular multiple subpanel design. Ease of field modification or component replacement